Open the Circle Calculator
The area of a circle is pi times the radius squared, written A = pi r squared. That is the whole formula. The trouble is almost never the formula itself. It is the number you plug into it.
Diameter is not radius
If a problem hands you the diameter, halve it before you do anything else. Diameter is the full width across the circle; radius is half of that, the distance from the center to the edge. Skip the halving step and your answer comes out four times too large, since squaring the doubled radius multiplies the result by 4. This is the single most common mistake with circle area, and it is entirely a reading problem rather than a math one.
What is the area of a circle with a diameter of 10?
Take a circle with a diameter of 10. The radius is 5, so the area is pi times 25, which is roughly 78.5 square units. If you had squared the 10 instead, you would have gotten about 314, a circle four times the size you actually have. Same formula, wrong input.
How do you find the radius from the circumference?
Sometimes the diameter is not given, but the circumference is. Divide the circumference by 2 pi to get the radius, then square it and multiply by pi. A circle with a circumference of about 31.4 has a radius of about 5, so its area is again roughly 78.5 square units. It sounds like extra work, but it is the same circle.
Circle area formulas at a glance
| You are given | Step 1 | Area |
|---|---|---|
| Radius (r) | Nothing to convert | pi r squared |
| Diameter (d) | Halve it: r = d / 2 | pi (d / 2) squared |
| Circumference (C) | r = C / (2 pi) | pi (C / (2 pi)) squared |
Why does the formula have pi in it?
Pi is the ratio of a circle’s circumference to its diameter, about 3.14159, and it shows up in the area formula because the area of a circle is tied to that same ratio. One way to see it: cut a circle into thin wedges and line them up, and they roughly form a rectangle whose height is the radius and whose width is half the circumference, pi r. Multiply those and you get pi r squared. It is a neat trick, and it is the reason the formula is not just a random rule to memorize.
Why is a pizza a good way to remember it?
A 10 inch pizza has a radius of 5 inches, so its area is about 78.5 square inches. A 14 inch pizza has a radius of 7, so it is about 154 square inches, almost double the area even though the diameter only went up 4 inches. That is the squaring at work, and it is why a slightly bigger pizza is a much bigger pizza.
For scaling other everyday numbers, our percentage calculator walkthrough handles the same kind of input swap. And if you are converting measurements into metric first, this height conversion guide keeps the units straight before you square anything.
Keep reading: Circle Calculator · All 111 free calculators · What Is the Circle Area Formula? · What Is the Surface Area of a Sphere?
