DoesWhatAnswersSlangEmojisCalculatorsTriviaPlayBlog

Trivia Questions and Weird Facts

Geometry

Circle Calculator

One circle measurement is enough to find the other three. Choose the value you know, and the calculator returns area, radius, diameter and circumference together so you can check a plan or measure a round object.

Loading the calculator. It runs in your browser, so JavaScript needs to be on.

How to use the Circle Calculator

  1. Choose Radius, Diameter, Circumference or Area, depending on the measurement you already have.
  2. Enter a positive value and select the matching length unit. In Area mode, enter square units, such as cm^2 when cm is selected.
  3. Read circle area at the top and the radius, diameter and circumference below it. Changing the unit label does not convert an existing number.

The formula

A = πr2, d = 2r and C = 2πr. Starting with diameter, r = d/2. Starting with circumference, r = C/(2π). Starting with area, r = √(A/π). Calculations use the browser's full precision value of π.

Worked example

With radius 5 cm, the area is 78.539816 cm^2, the diameter is 10 cm and the circumference is 31.415927 cm. Entering diameter 10 gives the same circle. An area of about 78.539816 cm^2 also returns a radius of 5 cm after display rounding.

Radius runs halfway across the circle

Measure from the center to the edge for radius, or edge to edge through the center for diameter. Confusing the two creates a large error: using 10 as the radius of a circle that is 10 cm across produces four times its real area. Circumference is the length of the outer boundary, such as the distance around a wheel.

Area grows faster than circumference

Doubling the radius doubles the circumference but multiplies area by four. A radius of 10 cm gives about 314.15927 cm^2, compared with 78.539816 cm^2 at 5 cm. This is why a pizza with twice the diameter contains four times the surface area, before accounting for the crust.

Choose a measurement you can actually take

A tape around a round post gives circumference directly. A ruler across a flat disc gives diameter more easily. Use the corresponding tab to avoid an extra conversion. These formulas describe an ideal circle, so an oval table or irregular trunk will need additional measurements and a different shape model.

Circle Calculator questions

How do I find diameter from circumference?

Divide circumference by pi. A circumference of 31.415927 cm corresponds to a diameter of about 10 cm.

How do I find radius from area?

Divide the area by pi, then take the square root. Area must be in square units so the resulting radius is in the matching length unit.

Why is my answer different from using 3.14?

The calculator uses more digits of pi. Using 3.14 is a convenient approximation, but it introduces a small rounding error that grows with the circle's size.

Related calculators