DoesWhatAnswersSlangEmojisCalculatorsTriviaPlayBlog

Volume of a Cone: Why It Is Exactly One Third of a Cylinder

by Alex Questly
Want the number, not the reading? The free Cone Calculator does the math for you.
Open the Cone Calculator

The volume of a cone is V = (1/3)pi r squared h, where r is the radius of the base and h is the height. That one third is not decoration. It is the whole point.

Picture a cylinder with the same base and height. Fill the cone with water and pour it in. It takes three cone-fulls to fill the cylinder, every time. That is where the one third comes from, and it holds for any cone, tall or squat.

A quick worked example

Take r = 3 and h = 4. Square the radius: 9. Multiply by the height: 36. Multiply by pi: about 113.1. Divide by 3: about 37.7 cubic units. Exactly, it is 12pi, which is 37.699 and change.

Watch the units and you are fine. If the radius is in centimeters, the answer is in cubic centimeters. Mixing units is the usual culprit when an answer looks wrong.

Why is a cone exactly one third of a cylinder?

Because the cone and the cylinder share the same base and height, and the cone tapers smoothly from full base to a single point. The math reason is calculus: stack up thin circular slices from the tip down, and each slice grows as the square of its distance from the tip. Add them all up and the total comes to exactly one third of the cylinder. No rounding, no approximation. Cavalieri’s principle, a 17th century idea about comparing solids slice by slice, gets you the same answer without the integrals.

What is the classic mistake?

Using the diameter instead of the radius. If a cone has a 6 cm base across, the radius is 3 cm, not 6. Plug in 6 and you get four times the correct volume. The other classic slip is forgetting to square the radius before multiplying by height. Square first, then multiply, then divide by 3.

How does a cone compare to other shapes?

Same base and height, different volumes. Here is how they stack up:

Shape Volume formula Share of the cylinder
Cylinder pi r squared h 1 (the whole thing)
Cone (1/3)pi r squared h 1/3
Sphere (radius r, height 2r) (4/3)pi r cubed 2/3 of that cylinder

That sphere line is the fun one. A sphere fits inside a cylinder of the same radius and height 2r, and it fills exactly two thirds of it. The cone fills one third. Put a cone and a sphere side by side in matching cylinders and the numbers line up neatly: 1/3 and 2/3. Archimedes was so proud of the sphere result that a sphere inside a cylinder was carved on his tomb.

What about a cone with a slanted side?

The slant height is not the height. Slant height is the distance from the tip down the side to the edge of the base, and it is always longer than the straight-up height. For volume you want the perpendicular height, the one measured straight down from tip to base. Slant height shows up in surface area, not volume. If a problem hands you the slant height and the radius, use the Pythagorean theorem to get the height first.


Keep reading: Cone Calculator · All 111 free calculators

Related Posts

Leave a Comment