DoesWhatAnswersSlangEmojisCalculatorsTriviaPlayBlog

Surface Area of a Cone: The Sandwich You Forgot to Count

by Alex Questly
Want the number, not the reading? The free Cone Calculator does the math for you.
Open the Cone Calculator

The surface area of a cone is A = pi r (r + l), where r is the base radius and l is the slant height. Most mistakes come from forgetting one of the two pieces.

Think of a cone as two parts. There is the circular base, area pi r squared. Then there is the curved side, which unrolls into a sector with area pi r l. Add them and you get pi r squared plus pi r l, which factors neatly into pi r (r + l). The l is the slant height, the distance from the tip down the side to the rim, not the vertical height.

What is the slant height of a cone?

The slant height is the straight-line distance from the tip to any point on the rim, measured along the surface. If you know the vertical height h and the radius r, it comes from the Pythagorean theorem: l = the square root of r squared plus h squared. That is because the radius, the height and the slant height form a right triangle inside the cone.

This is the piece people mix up. Vertical height goes straight down the middle. Slant height runs down the outside. The slant height is always a bit longer than the vertical height, so if your l is smaller than h, you have swapped them.

What is the surface area of a cone with a worked example?

Take r = 3 and h = 4. The slant height is the square root of 3 squared plus 4 squared, so the square root of 25, which is 5. Then A = pi times 3 times (3 + 5), which is pi times 24, or about 75.4 square units.

Here is a second one with a decimal answer. Take r = 5 and l = 13, a common pair from a 5-12-13 triangle. Then A = pi times 5 times (5 + 13), which is pi times 90, or about 282.7 square units.

What is the curved surface area of a cone?

Sometimes the question only wants the side, not the base. That part is pi r l. With r = 3 and l = 5, the curved surface area is pi times 15, or about 47.1 square units. The full surface area adds the base, pi r squared, which is about 28.3, for the 75.4 total above.

What is the classic mistake?

Using the vertical height in place of the slant height. The formula needs l, not h, so plugging h straight in gives an answer that is too small. The other common slip is forgetting the base entirely and reporting only pi r l when the question asked for total surface area.

Piece Formula Example (r = 3, l = 5)
Base pi r squared about 28.3
Curved side pi r l about 47.1
Total pi r (r + l) about 75.4

Unit discipline matters here too, the same habit that saves you on height conversions. Square units in, square units out, and keep r and l in the same unit before you multiply.


Keep reading: Cone Calculator · All 111 free calculators · What Is the Surface Area of a Sphere? · What Is the Circle Area Formula?

Related Posts

Leave a Comment