Cylinder Calculator
A radius and a height are enough to calculate a right circular cylinder. Get the space inside, the area around the curved wall and the full surface area including both circular ends.
Loading the calculator. It runs in your browser, so JavaScript needs to be on.
How to use the Cylinder Calculator
- Enter Base radius, which is half the diameter of the circular base.
- Enter Perpendicular height in the same length unit, then choose that unit in the selector.
- Read volume at the top. The breakdown separates total surface area, lateral surface area, one base area and diameter.
The formula
Base area B = πr2. Volume V = Bh = πr2h. Lateral surface area L = 2πrh. Total surface area S = 2B + L = 2πr(r + h). Diameter d = 2r. The unit selector labels entered measurements and does not convert their values.
Worked example
A cylinder with radius 3 cm and height 4 cm has volume 113.09734 cm^3. Its curved wall covers 75.398224 cm^2, each base covers 28.274334 cm^2, and the total closed surface area is 131.94689 cm^2.
Unroll the curved wall into a rectangle
The wall's width is the base circumference, 2 pi r, and its height is h. Multiplying those lengths gives the lateral area. This is the measurement you need for a label that wraps around a cylindrical can. Add overlap or seam allowance separately, and leave the two circular ends out of that label calculation.
A closed cylinder and an open tank need different areas
The reported total includes both bases. For an open-top tank, add lateral surface area and one base area instead. In the example above, that is about 103.67256 cm^2. For a pipe open at both ends, the outer lateral area alone describes the outside wall, but material volume also requires its inner radius.
Inside dimensions determine usable capacity
For a container with thick walls, external measurements overstate its capacity. Measure the internal radius and the actual fill height. A cylinder with internal radius 10 cm and filled height 20 cm holds about 6,283.1853 cm^3, or 6.2831853 liters. One liter equals 1,000 cubic centimeters, so converting a cubic result needs a volume conversion.
Cylinder Calculator questions
What is the volume of a cylinder?
Multiply pi by radius squared and by perpendicular height. A radius of 1 cm and height of 1 cm give 3.1415927 cm^3.
Can I use diameter instead of radius?
Divide diameter by two first. A 6 cm diameter cylinder uses radius 3 cm. Using 6 as radius makes the volume four times too large.
Does total surface area include both ends?
Yes. Total surface area includes the curved wall and two circular bases. Use the separately listed lateral and base areas when one or both ends are open.
Related calculators
- Volume CalculatorEnter a box, cylinder, sphere or cone's dimensions to get volume and total surface area....
- Circle CalculatorEnter radius, diameter, circumference or area to solve the rest of your circle. Get all...
- Cone CalculatorEnter base radius and perpendicular height to get cone volume, slant height and surface...
- Sphere CalculatorEnter a sphere's radius, diameter, volume or surface area to find the rest. See cubic...
- Concrete CalculatorEnter slab, footing or round-column dimensions to get cubic yards and whole bags. Set...