How Do You Draw Eyes?
What order do you draw an eye in?
Start with the shape the eye sits in, not the eye itself. A light almond or circle for the socket, then a curved line for the upper lid, then the iris, then the pupil, then the lower lid. Lashes and creases go last, once the shapes hold together.
Working in that order means you are always placing the next piece against something that already exists. Jumping straight to a dark, detailed pupil is the fastest way to end up with an eye floating on a blank face.
Why do drawn eyes look dead or flat?
Two habits cause most of it.
- The full circle iris. In a relaxed, forward-looking eye, the upper lid covers the top of the iris and the lower lid just touches the bottom. Draw a complete circle and the eye reads as surprised or glassy.
- Two eyes drawn separately. Real eyes sit on one curve across the face and point the same way. Sketch both at once, as a pair, even roughly.
A third one: too much white. The sclera is rarely pure white. A little shading at the corners and under the upper lid gives the eyeball roundness.
How big should the iris and pupil be?
Roughly, the iris is about half the width of the visible eye opening, and the pupil is about a third of the iris. Those are proportions to draw from, not rules to measure with a ruler. Bigger pupils read younger and softer; smaller ones read sharper or more intense.
| Part | Rough proportion |
|---|---|
| Iris width | About half the eye opening |
| Pupil | About one third of the iris |
| Eye spacing | About one eye width apart |
Where should you put the highlight?
One small bright dot, placed on the same side of both eyes, sells the whole drawing. It reads as a light source, and it makes the eye look wet. Two highlights on one eye and none on the other is a common tell that something is off.
Here is a detail worth knowing: the visible white of the eye is called the sclera, and it is not a sphere. It is closer to two joined shapes, which is why shading it like a ball looks wrong.
What should you practice first?
Draw the same eye from the front, three-quarter and side view. Profiles are the ones people avoid, and they are where lids, lashes and the tear duct finally make sense. Ten minutes of pairs beats an hour of single perfect eyes.