DoesWhatAnswersSlangEmojisCalculatorsTriviaPlayBlog

Trivia Questions and Weird Facts

How To

How Do You Change a Tire?

Short answerPull off the road on flat ground, turn on your hazards, and set the parking brake. Loosen the lug nuts slightly before jacking, lift the car, swap the wheel, hand tighten the nuts, lower it, then tighten in a star pattern. Check the spare's pressure soon after.

What should you do before you start?

Get somewhere safe first. A flat on a highway shoulder is one of the more dangerous places a driver can be, so pull as far from traffic as you can, turn on your hazards, and set the parking brake. If you have a reflective triangle or flare, put it out behind the car. Then get the jack, lug wrench, and spare out before you lift anything.

Loosen the lug nuts one turn while the tire is still on the ground. This is the step people skip, and it is the one that ruins the job. Once the wheel is in the air it just spins.

How do you jack the car up safely?

Find the jack points in your owner's manual, usually a reinforced seam near each wheel. A jack placed wrong can bend the body or slip. Raise the car only until the flat tire clears the ground, no higher.

How do you put the spare on?

What about the spare itself?

Most spares are temporary tires, often called donuts, and they are usually rated for around 50 mph and roughly 50 miles. They also lose air slowly while sitting in the trunk, so check the pressure before you need it. A 2023 AAA survey found that a large share of drivers have never checked their spare at all, which is a good reason to look now. Get the flat repaired or replaced as soon as you can.

ToolWhat it does
JackLifts the car
Lug wrenchLoosens and tightens nuts
SpareGets you to a shop

No spare? Some cars ship with a sealant kit or run flat tires instead, so check your trunk before you need it.

Keep going