DoesWhatAnswersSlangEmojisCalculatorsTriviaPlayBlog

Trivia Questions and Weird Facts

Unit Converters

Height Converter

Turn a height in centimeters into familiar feet and inches, or go the other way. The extra rows show meters, total inches, and decimal feet so you can fill out a form in the units it actually asks for.

Loading the calculator. It runs in your browser, so JavaScript needs to be on.

How to use the Height Converter

  1. Choose Centimeters to feet and inches, then enter Height in centimeters.
  2. For the reverse conversion, choose Feet and inches to centimeters and fill in both Feet and Inches. Use zero when a part is absent.
  3. Use whole numbers in Feet and a value from 0 to less than 12 in Inches. Fractional inches such as 9.5 are accepted.
  4. Read the main result, then check the supporting rows for total inches, decimal feet, or meters.

The formula

Centimeters = (12 × feet + inches) × 2.54. Total inches = centimeters / 2.54, and decimal feet = centimeters / 30.48. One inch is exactly 2.54 centimeters. For the feet-and-inches display, total inches are rounded to the nearest tenth before splitting into groups of twelve.

Worked example

For 5 ft 9 in, first calculate 5 × 12 + 9 = 69 inches. Multiplying by 2.54 gives 175.26 cm, or 1.7526 meters. In the other direction, 182.88 cm is exactly 6 ft 0 in, with 72 total inches.

5.9 feet is not 5 feet 9 inches

The decimal part of a foot is a fraction of twelve inches. A height of 5.9 feet equals 5 feet plus 0.9 × 12 inches, or 5 ft 10.8 in. A height of 5 ft 9 in equals 5.75 decimal feet. The separate input fields prevent those two notations from being mixed up.

Rounding at the next foot

The main feet-and-inches answer rounds to one decimal place in inches. A measurement just below six feet can therefore display 6 ft 0 in. For example, 182.87 cm rounds that way, even though it is slightly below 182.88 cm. The converter carries a rounded twelve inches into the next foot instead of showing the awkward 5 ft 12 in.

Match the precision to your measurement

A conversion factor can be exact even when your tape measurement is approximate. If you measured to the nearest centimeter, extra decimal places do not make the original reading more precise. The centimeters result shows up to two decimals, total inches up to three, and decimal feet and meters up to four. Keep more digits for calculations, then round for the form or record you are completing.

Height Converter questions

How many centimeters is 5 feet 9 inches?

5 feet 9 inches is exactly 175.26 centimeters. It is also 69 inches or 1.7526 meters.

How tall is 180 cm in feet and inches?

180 cm is approximately 5 ft 10.9 in with this tool's rounding. It is about 5.9055 decimal feet.

Can I enter 12 in the inches field?

Use an extra foot and zero inches instead. The field accepts inches from zero up to, but not including, twelve to keep mixed-unit notation clear.

Is the inch-to-centimeter factor exact?

Yes, one international inch equals exactly 2.54 centimeters. Rounding occurs in the displayed result, not in that conversion factor.

Related calculators